Lotus Elise S1 Service Notes page 378

Lotus Service Notes
Section MN
RHP Shown
(LHD symmetrically
opposite)
Wiper linkage
in full travel
position
IH0E
6. Re-assemble in the reverse order to removal, torque tightening the bracket bolts to 20 Nm.
M N . 8 - F I T M E N T O F DRIVING LAMPS
The optional driving lamps mounted in the air intake aperture provide additional lighting on main beam,
operating in conjunction with the main headlamps. All cars are built with a wiring harness which accommo-
dates the driving lamps, which may therefore be retro-fitted on any car if the air intake grille is also replaced.
Parts Required
Description
Driving Lamp
Air Intake Grille
Mounting Plate, LH
Mounting Plate, RH
Pulsert, M8, mounting plate fixing
Plastic Screw, M8 x 25, plate fixing
Washer, plate fixing
Plastic Screw, M8 x 40, lamp to plate
Spring, lamp to plate
Grommet, lamp harness
Part Number Oty
A111M6008F 2
B111B0059F 1
A111B0051F 1
A111B0050F 1
A 0 7 5 W 6 1 5 5 F 6
A 0 8 2 W 6 5 3 0 F 6
A111W4156F 6
A 0 8 2 W 6 5 3 1 F 6
A111B6004F 6
A075U6043Z 2
Lamp mounting plate
Coil spring
screw
Driving
lamp
Lamp mounting
Crash structure
Harness grommet
Plate clamping washer
_m19
Page 22