ENGINE
CAMSHAFT TIMING BELT - KB ENGINES
Remove
CAUTION: Do not use camshaft gear, gear
/ j \
retaining bolt or timing belt to rotate
crankshaft.
3283
M124960
5. Check that timimg mark on crankshaft pulley is
aligned with mark on timing belt lower cover.
1. Slacken bottom bolt securing timing belt upper
front cover.
~
NOTE: Remove bottom bolt when cover is
/ \
not slotted.
2. Remove 6 bolts from timing belt upper front
cover.
3. Remove timing belt upper front cover and seal.
IM 1S71
6. Position flywheel locking tool 18G 1571 to
flywheel.
7. Secure with 2 bolts.
12M0556
4. Rotate crankshaft clockwise to align camshaft
gear timing marks with top face of cylinder
head - 90° BTDC.
138 OVERHAUL