Lotus Elise S1 Service Notes page 297

MANUAL GEARBOX
Refit
4. Inner bush: Using tool 18G 1723-1, drift inner
bush into differential housing.
5. Outer bush: Using tool 18G 1723-2, drift outer
bush into differential housing.
A
CAUTION: Ensure end of tool 18G 1723-2
/ ! \ is located in inner bush.
6. Gearboxes fitted with output shaft bearing
retainer plate: Remove all traces of Patchlok
compound from output shaft bearing retainer
plate bolt holes using an M6 tap.
~ CAUTION: Ensure bolt holes are
| \ thoroughly cleaned.
1 8 OVERHAUL REVISED: 12/97