Lotus Elise S1 Service Notes page 487

Lotus Service Notes Section PF
7. Fit new engine breather hoses:
Parts Required
Breather Hose Kit A111E0035J 1
Assemble the cam cover breather pipe assembly as shown and connect to the two cam cover spigots and
airbox grommet.
Grommet A082L6181F
Adaptor A111E6153S
'T'-piece A111E6152S
Hose A111E0032S
Clip A111E6155S
Hose A111E0029S
Clip A111E6154S
Hose A111E6151S
I x02l
8. If the oil cooler kit is to be fitted, replace the oil filter housing with the new item, and fit the 90° adaptor for
the oil pressure switch.
9. Refit the clutch and transmission (sub-section QF.4) to the engine, and fit the complete power unit back
into the car (sub-section EE.3). Note that the luggage bay bulkhead is not re-fitted.
10. Fit the new throttle cable A111J0140S to the
engine, connecting to the linkage between the
two throttle bodies, and route as previously to
the pedal box.
11. At the pedal box, check the specification of 'U'
bracket attaching the throttle linkage to the
pedal. The later type (introduced January '98)
bracket must be fitted which is both thicker and
wider. Check also that the bracket is correctly
assembled and hooked through the pedal ex-
trusion.
V bracket
Throttle pedal
Page 5