Lotus Elise S1 Service Notes page 199

ENGINE
18G1769A
12M0564A
NOTE: Camshaft front oil seal illustrated.
6. Fit oil seal protector 18G 1749 over end of
camshaft.
7. Fit new camshaft oil seals using tool 18G
1769A.
NOTE: Front oil seals are coloured
BLACK, rear oil seals are coloured RED
~ CAUTION: Oil seals must be fitted dry. Do
/ ! \ not use tool 18G 1769 for fitting seals as
they will not be positioned correctly within
recess.
Camshaft carrier and oil seals - All K16 Non VVC
engines - refit
1. Ensure 2 locating dowels are fitted in camshaft
carrier.
12M3523
2
2.
Apply continuous, thin beads of sealant, Part
Number GUG 705963GM to paths on cylinder
head as shown then spread to an even film
using a roller.
~ CAUTION: Ensure sealant is kept clear of
/ j \ tappet oil feed holes and lubrication
grooves in carrier and that assembly is
completed within 20 minutes.
3. Lubricate camshaft cams and journals with
engine oil.
11 1
8RM 0056
4. Fit camshaft carrier, fit and progressively
tighten bolts, in sequence shown, to 10 Nm.
6 2 OVERHAUL