Removing Connection Blade Dummy Modules; Installing A Double-Width Connection Blade (Infiniband) - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Connection blades
Ê Locate the mounting bay for the new connection blade using the information
in section "Connection blade fitting rules" on page
8.3.1.3

Removing connection blade dummy modules

Ê Remove the connection blade dummy modules from the side by side slots
of a fabric as described in section
module" on page
V
CAUTION!
Keep the dummy modules for future use.
Always replace connection blade dummy modules into unused
connection blade slots to comply with applicable EMC regulations and
satisfy cooling requirements.
8.3.1.4

Installing a double-width connection blade (Infiniband)

Ê Unpack the Infiniband connection blade.
Figure 26: Removing the separating clip
120
"Removing connection blade dummy
113.
Upgrade and Maintenance Manual
106.
BX900 S2