Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual page 185

5 CSS indicator (yellow)
– Lights up yellow if a prefailure event was detected for a CSS
component that you can fix yourself (for reasons of precaution) with
the CSS concept.
– Flashes yellow if an error was detected that you can fix yourself
with the CSS concept.
– Does not light up when the system is OK.
If the event is still acute after a power cycle, the indicator is activated
after the restart.
The indicator also lights up in standby mode.
6 Identification (ID) button with ID indicators (blue)
ID indicators on the front and rear of the server light up when the ID
button is pressed. The two ID indicators are synchronized. To
deactivate, press the button again.
The ID indicator can also be activated via ServerView Operations
Manager and the Management Blade Web interface; its status is
reported to ServerView Operations Manager and the Management
Blade.
7, 9 LAN link indicators (Management LAN ports)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
8, 10 LAN activity indicators (Management LAN ports)
Flashes yellow when a LAN transfer is in progress.
Does not light up if no LAN transfer.
11 Reset button
BX900 S2
Upgrade and Maintenance Manual
Appendix
185