Leds On The Control Panel - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Navigation buttons for the Local Service Display
With the buttons
the

13.3.1.2 LEDs on the control panel

Power indicator (two-color)
Lights up green when the system unit is switched on.
Lights up orange when the system unit is switched OFF, but mains
voltage is present (standby mode).
Global Error indicator (orange)
– Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
– Flashes orange if an error was detected that requires service
intervention.
– Does not light up if there is no critical event.
If the event is still acute after a power cycle, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), in the Management Blade Web interface, on the
ServerView Local Service Panel, on the ServerView Local Service
Display, in the ServerView Operations Manager or via the iRMC
S2/S3's Web interface.
BX900 S2
, ,
button executes the selected function.
Upgrade and Maintenance Manual
and you select a function. Pressing
Appendix
181