Connection blades
The configuration of the connection blade is controlled by the management
blade. Each port group can be configured to a certain link protocol. The
management blade web interface allows the user to modify the port group link
speed configuration.
8.2
Single-width connection blades
8.2.1
Installing single-width connection blades
Upgrade and Repair Units (URU)
average hardware task duration: 5 minutes
average software task duration: 10 minutes
8.2.1.1
Required tools
Preliminary and concluding steps: tool-less
●
Installing connection blades: tool-less
●
8.2.1.2
Preliminary steps
Before installing a single-width connection blade, perform the following steps:
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired system unit as described in section
error class" on page
Ê Locate the mounting bay for the new connection blade using the information
in section
"Connection blade fitting rules" on page
112
48.
45.
Upgrade and Maintenance Manual
"Opening the rack
"Determining the
106.
BX900 S2