Installing A Dummy Server Blade Module - Fujitsu Primergy BX900 S2 Upgrade And Maintenance Manual

Basic hardware procedures
4.6.3

Installing a dummy server blade module

Any unused server blade slots must be fitted with dummy modules to comply
with EMC regulations for the system and to ensure sufficient cooling of the
components.
1
Figure 10: Dummy server blade module
The handle (1) is movable and acts as a release lever. It must be at the bottom
when you install the dummy module in the system unit (see figure 11 on
page 60).
Upgrade and Maintenance Manual 59
BX900 S2