RuggedCom RuggedRouter RX1000 Family Installation Manual page 8

Product Overview

-40 to +85°C operating temperature (no fans)

Conformal coated printed circuit boards (optional)

18 AWG galvanized steel enclosure
Power Supply Options

Fully integrated, dual-redundant (optional) power supplies (RX1000/RX1100)

Power over Ethernet (PoE) on 10/100BaseTx ports (RX1000P/RX1100P)

Universal high-voltage range: 88-300VDC or 85-264VAC

Popular low voltage DC ranges: 12, 24 or 48 VDC

Terminal blocks for reliable, maintenance free connections

CSA/UL 60950 safety approved to +85°C
Physical Ports

Ethernet Options (up to 4 ports):
o 10/100BaseTX (with PoE on RX1000P and RX1100P)
o
100BaseFX

WAN Port Options (up to 8 ports):
o T1/E1 (channelized/unchannelized) supports 2 Mbps G.703 with 120 ohm
balanced connections
o T3/E3 DS3
o 56 Kbps DDS
o DSL (supports G.992.1, G.992.2, G.992 Annex A)

Serial Ports (up to 8 ports):
o Fully compliant EIA/TIA RS485, RS422, RS232 software selectable serial
ports
o Raw socket mode support allows conversion of any serial protocol

Embedded Modem Port

Embedded EvDO – CDMA cellular modem

Embedded HSPA – GSM cellular modem

GPS / IRIG-B / IEEE 1588 Time Sync
Protocols

WAN
o Frame Relay RFC 1490 or RFC 1294
o PPP RFC 1661, 1332, 1321, 1334
o PPPoE over DSL, PAP, CHAP Authentication

IP
o Routing
o VRRP, OSPF, DHCP Agent
o Traffic prioritization, NTP Host (Stratum 2)
Frame Relay Support

ISO and ITU compliant, network certified

ANSI T1.617 Annex D, Q.933 or LMI Local Signaling
®
RuggedCom - Rev.122 8 RuggedRouter
®
RX1000 Family