Fiber Optic Ethernet Ports - RuggedCom RuggedRouter RX1000 Family Installation Manual

Communication Ports

4.2 Fiber Optic Ethernet Ports

Depending on the order code of the product, RX1000 series products can be
equipped with several different types of fiber optic ports. The Transmit (TX) and
Receive (RX) connections of each port must be properly matched and connected for
proper link establishment and operation. Modules populated on the top row of the
device typically have locking mechanisms or tabs towards the top of the unit.
Modules located on the bottom row of the device have locking mechanisms or tabs
towards the bottom of the device.
The following figures show each fiber optic connector style with a side and top view
to allow the user to identify the proper cable connection orientation. If modules are
populated on the bottom row of the device, the transceiver orientation will be
reversed (i.e. RX and TX will be reversed).
®
RuggedCom - Rev.122 26 RuggedRouter
®
RX1000 Family