Figure 4: 19" Rack Mount Adapters; Figure 5: Rack Mount Adapter Mounting Location - RuggedCom RuggedRouter RX1000 Family Installation Manual

Industrially hardened cyber security appliance

Hide thumbs Also See for RuggedRouter RX1000 Family:

Table of Contents

3.1.1

Rack Mounting

Figure 4: 19" Rack Mount Adapters

The RX1000 series can be rack mounted using the included rack mount adapter

assemblies shown in Figure 4. Secure the rack mount adapter to the front side of the

chassis using the included black PAN head Phillips screws in the positions shown in

Figure 5. The entire chassis can then be mounted to a standard 19" rack. An

additional two rack mount adapters are included to optionally secure the rear of the

chassis in high-vibration, or seismically active locations.

NOTE:

Since heat within the RX1000 is channeled to the enclosure, it is

recommended that 1 rack-unit of space (1.75") be kept unpopulated and free of

equipment above each RX1000 series product to allow convectional airflow.

Although forced airflow is not necessary, any increase in airflow will result in a

reduction of ambient temperature that will improve long-term reliability of all

equipment mounted within the rack space.

RuggedRouter

RX1000 Family

Installation

RuggedCom

- Rev.122

Table of Contents