Mitel 5340 User Reference Manual page 93

Mitel IP Phone User Reference Guide Release 4.1
One touch speed dial on the 5304 phone
Using One Touch Speed Dial, you can make a call to a pre-programmed number.
To use this feature, a programmable key must be programmed as a One Touch
Speed Dial. See "Program memory keys" on page 104.
To use One Touch Speed Dial, choose one of the following:
• Lift the handset and press the One Touch Speed Dial key.
• Press an available Line Appearance key, to activate the speakerphone,
and then press the One Touch Speed Dial key. Note that the call is
effectively muted until you pick up the handset.
• Press the One Touch Speed Dial key. This will select an available Line
Appearance and activate the speakerphone. Note that the call is
effectively muted until you pick up the handset.
Page on the 5304 phone
Using Page, you can send a page to all of the phones at your site. The page is
broadcast through the speaker of each available phone. To use this feature, you
must have a memory key programmed as a Page key. See "Program memory
keys" on page 104.
To page all of the phones at your site, follow these steps:
1. Lift the handset
2. Select a memory key programmed with the Page feature.
3. Your phone LCD screen displays "Calling: Site Page" while the system
identifies the available phones at your site.
When the system is ready for you to begin your page, you will hear an alert
tone and the phone LCD screen displays the number of phones being
paged..
4. Speak into the handset.
To end the page, replace the handset.
NOTE: A page will not be broadcast on phones that are busy.
NOTE: If you select Page while there is already a page in progress, the system
will wait until the page in progress is completed before your page is started.
Your phone will display "Calling: Site Page" and you will hear ringing while
you are waiting.
Calling: Site Page
Paging: 7 of 10
91