Mitel 5340 User Reference Manual page 72

Mitel IP Phone User Reference Guide Release 4.1
2. When the system is ready for you to begin your page, you will hear an alert
tone and the phone LCD screen displays the number of phones being paged.
3. Speak into the handset or the speakerphone.
4. To end the page, you have the following options:
• Replace the handset if using the handset.
• Select the
NOTE: A page is not broadcast on phones that are busy.
If you select Page while there is already a page in progress, the system waits
until the page in progress is completed before your page is started. Your
phone displays "Calling: Site Page" and you hear ringing while you are
waiting.
Park and retrieve on the 5212/5312 IP phone
Using Park and Retrieve, you can put a call on hold at a park location so that it
can be retrieved from any other phone at your business. To use this feature, a
memory key must be programmed as a Park/Retrieve key.
To put a call on hold at a park location, follow these steps:
1. While on an active call, select a memory key programmed with the
Park/Retrieve feature.
The system places the call on hold at a park location. The park location is
displayed on your phone LCD screen:
You are no longer connected with the caller and your phone returns to the
idle state.
To retrieve a parked call, follow these steps:
1. From an idle phone, lift the handset.
This will select the next available Line Appearance. Select a memory key
programmed with the Park/Retrieve feature. The phone LCD screen displays:
2. Enter the required park location using the phone keypad.
70
Paging: 7 of 10
key if using the speakerphone.
Parked at: 4
Park Location: