Mitel 5340 User Reference Manual page 40

Mitel IP Phone User Reference Guide Release 4.1
5. Once the required number is displayed, press the DIAL softkey to make the
call. The next available Line Appearance is selected and you will hear ringing
once the number has been dialed.
NOTE: The * symbol beside the position number means that the call was not
answered.
The position of the call in the call list is displayed in front of the phone
number.
Press the QUIT softkey to exit from the call list or press
Call pickup on the 5224/5324 phone
Using the call pickup feature, you can answer incoming calls for other members
of your call pickup group.
To use this feature, you must be a member of a call pickup group and have a
memory key programmed as Pickup.
When a call comes into any member of your call pickup group, their phone will
ring and your Pickup key will flash. To answer the call, follow these steps:
1. Lift the handset.
2. Press the Pickup key.
or
1. Press the Pickup key to answer the call in speaker mode.
You can also join and leave your pickup group with a Join/Leave group key or via
the web interface. When you leave the group, this disables other group
members from picking up your calls; however, you can still pickup other
members' calls. See "Join/leave group on the 5224/5324 phone" on page 43
and "Join/leave call groups" on page 116.
NOTE: You cannot pick up calls to a member of your call pickup group if the call
does not result in the member phone ringing. For example, if the called
member is either logged out or has no available Line Appearances, then you
cannot pick up the call.
Company speed dial on the 5224/5324 phone
Using Company Speed Dial, you can call a number from the External Directory
by pressing a single memory key on your phone. To use this feature, you must
have a phone key programmed with Company Speed Dial. See "Program
memory keys" on page 104.
To make a call using the company speed dial, choose one of the following:
• Press the Company Speed Dial key for the number you want to call.
The system selects the next available Line Appearance for you and
activates the speakerphone.
• Activate the speakerphone and press the Company Speed Dial key.
• Select an available Line Appearance. This activates the speakerphone.
Press the Company Speed Dial key.
38
.