Mitel 5340 User Reference Manual page 50

Mitel IP Phone User Reference Guide Release 4.1
One-Touch speed dial on the 5224/5324 phone
Using One-Touch Speed Dial, you can make a call to a pre-programmed
number. To use this feature, a programmable key must be programmed as a
One-Touch Speed Dial.
To use One Touch Speed Dial, choose one of the following:
• Lift the handset and press the One Touch Speed Dial key.
• Press an available Line Appearance key, to activate the speakerphone,
and then press the One Touch Speed Dial key.
• Press the One Touch Speed Dial key. This will select an available Line
Appearance and activate the speakerphone.
Page on the 5224/5324 phone
Using Page, you can send a page to all of the phones at your site. The page is
broadcast through the speaker of each available phone. To use this feature, you
must have a memory key programmed as a Page key.
To page all of the phones at your site, follow these steps:
1. Select a memory key programmed with the Page feature.
Your phone LCD displays "Calling: Site Page" while the system identifies the
available phones at your site.
2. When the system is ready for you to begin your page, you will hear an alert
tone and the phone LCD screen displays the number of phones being paged.
3. Speak into the handset or the speakerphone.
4. To end the page, you have the following options:
• Replace the handset if using the handset.
• Select the key.
• Select the END softkey.
NOTE: A page is not broadcast on phones that are busy.
If you select Page while there is already a page in progress, the system waits
until the page in progress is completed before your page is started. Your
phone displays "Calling: Site Page" and you hear ringing while you are
waiting.
On the phones receiving a page, the phone LCD screen displays the name of
the user who originated the page and an END softkey. The user receiving the
page can stop the page to their phone by selecting the END softkey.
48
Calling: Site Page
Paging: 7 of 10
END