Mitel 5340 User Reference Manual page 73

Mitel IP Phone User Reference Guide Release 4.1
The system connects you with the caller who was on hold at the park
location. The LCD screen now displays the caller's name (if known) or
number.
NOTE: To cancel the retrieval of the parked call, press the
If you enter a park location where there is no caller on hold, the phone LCD
will briefly display "No Parked Call".
There are nine park locations available (1 through 9). If all park locations are
in use when you try to park a call, the phone LCD will briefly display "Park
Locations Full" and the call will be placed on hold.
If the call is left parked for 30 seconds, the phone of the person who parked
the call will beep and the phone's LCD will briefly display "Call parked at: "
with the park location number to remind you that the call has not been
retrieved.
Speaker on the 5212/5312 IP phone
Using Speaker, you can turn the speakerphone on your phone on and off. To use
Speaker, press the
Transfer call on the 5212/5312 IP phone
Using Transfer, you can transfer a call from one phone to another. To transfer a
call, follow these steps:
1. While on an active call, press the
on hold, and the LCD screen displays:
2. Enter the extension or phone number of the person to whom you wish to
transfer, or press a One-Touch Speed Dial button.
3. Press the key once you hear ringing. The LCD screen displays the
message "Transfer Complete" for approximately five seconds before
returning to an idle state.
NOTE: Instead of pressing the
Robin Jones
key.
key. The system places the call
Transfer To:
Transfer To: 415
key immediately you can wait until the
key.
71