Table of Contents
Advertisement
4. Grasp the fan bracket and push it gently toward the left side of the chassis until
5. Pull the fan and bracket away from the chassis.
To install the SCSI fan and bracket, reverse the previous steps.
Operator information panel
Note: Read "Before you begin" on page 41 and "Safety information" on page 129.
Complete the following steps to remove the operator information panel:
1. Turn off the computer and attached devices; then, disconnect all external cables
2. Remove the cover (see "Removing the cover of the 6226" on page 60).
3. Disconnect the operator information panel from the system board.
4. Press the release tab on the right of the operator information panel to the left
88
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
the tabs are released from the chassis and the bracket pivots out.
Retainer tabs
( 4 places )
and power cords.
until it comes loose.
Retainer slots
Advertisement
Table of Contents
