Host Built-In Self Test (Bist); Bus Fault Messages - IBM IntelliStation E Pro Hardware Maintenance Manual

Host built-in self test (BIST)

Message
Host fail (level-informational; built-in
self-test for the host failed)

Bus fault messages

Bus fault messages
Failure reading I2C device. Check devices
on bus 0.
Failure reading I2C device. Check devices
on bus 1.
Failure reading I2C device. Check devices
on bus 2.
Failure reading I2C device. Check devices
on bus 3.
Failure reading I2C device. Check device
on bus 4.
116
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
Action
1. Reseat the microprocessor.
2. Replace the microprocessor.
Message Action
1. If installed, reseat the I2C cable between Remote Supervisor
Adapter and the remote supervisor adapter connector.
2. DIMMs.
3. System board.
1. Reseat the I2C cable between the operator information panel
and system board (connector CN6).
2. Operator information panel.
3. System board.
1. Reseat the cable between system board and the power supply
(connector CN4).
2. Power supply.
3. System board.
1. Reseat the cable between the DASD backplane and connector
of system board.
2. DASD backplane.
3. System board.
v System board