Power Supply - IBM IntelliStation E Pro Hardware Maintenance Manual

4. Disconnect the speaker cable from the system board.
5. Lift the speaker up and out of the side brackets.
To replace the speaker, reverse the previous steps.

Power supply

Note: Read "Before you begin" on page 41 and the safety notices at "Safety
Complete the following steps to remove the power supply:
1. Turn off the computer and attached devices; then, disconnect all external cables
2. Remove the cover and the frame-support bracket (see"Removing the cover of
3. Swing the diskette drive cage up.
82
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
Retainer slots
information" on page 129.
and power cords.
the 6216" on page 45 and "Removing the frame-support bracket" on page 45).