6. Reconnect the external cables and power cords, and turn on the attached
Replacing the cover of the 6226
Complete the following steps to replace the computer cover:
1. Clear any cables that might impede the replacement of the cover.
2. Place the cover over the chassis, and pivot it down over the computer until it
3. Reconnect the external cables and power cords to the computer; then, connect
4. Turn on the attached devices; then, turn on the computer.
72
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
cables connected to the computer.
devices, then the computer.
snaps into place.
the power cords to electrical outlets.
Rope clip