Table of Contents
Advertisement
Removing the cover of the 6216
To remove the cover from the IntelliStation E Pro Type 6216 computer, complete
the following steps:
1. Review the information in "Safety information" on page 129 and "Before you
2. Turn off the computer and all attached devices.
3. Disconnect all external cables and power cords.
4. Press the buttons on both sides of the computer cover and lift the cover from
To replace the cover, see "Replacing the cover of the 6216" on page 55.
Removing the frame-support bracket
You must remove the frame-support bracket to access many of the components of
the IntelliStation E Pro Type 6216 computer. To remove the frame-support bracket,
complete the following steps:
1. Pivot the drive cages until the pivot locks catch the front of the chassis, holding
2. Lift the frame-support bracket out of the computer.
To replace the frame-support bracket, reverse the steps.
begin" on page 41.
the computer.
the drive cages in place.
45
Installing options
Advertisement
Table of Contents
