Table of Contents
Advertisement
2. Remove the air duct from its position over the microprocessor.
3. Connect the SCSI signal cable to the adapter and one or more of the signal
4. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
5. If you have other adapters or options to install or remove, do so now.
6. Reinstall the rear adapter support bracket; then, rotate it to the closed (locked)
7. Replace the frame-support bracket, and replace the air duct.
8. Replace the cover (see "Replacing the cover of the 6216" on page 55).
9. Reconnect the external cables and power cords; then, turn on the attached
Installing internal drives
Different types of drives enable the computer to read various types of media and
store data in different formats. The computer comes with the following drives
preinstalled:
v Diskette
v Hard disk
v CD-ROM, DVD-ROM, or CD-RW
Internal drive bays
The IntelliStation E Pro Type 6216 computer comes with an IDE CD-ROM,
DVD-ROM, or CD-RW drive in bay 1; a 3.5-in., 1.44-MB diskette drive in bay 2; and
48
IBM IntelliStation E Pro Types 6216 and 6226: Hardware Maintenance Manual
cable connectors to the rear of the SCSI devices.
connector on the system board (see "System board" on page 43 for the location
of the SCSI LED connector).
position.
devices and the computer.
Advertisement
Table of Contents
