Table of Contents
Advertisement
Removing the cover
Important:
See "Safety information" on page 93and "Handling electrostatic discharge-sensitive
devices" on page 96 before you begin.
To remove the cover:
1. Shut down the operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Remove the two screws at the rear of the left side cover and slide the cover to
the rear to remove.
Chapter 5. Installing Options
23
Advertisement
Table of Contents
