Removing The Cover - IBM Aptiva Series Handbook

Removing the cover

Follow these steps to remove the system unit cover:
1.
Release the lock that secures the cover at the back of
the unit by pressing it toward the unlocked icon.
2.
Slip your hand underneath the front panel and pull on
the handle to fully release the cover.
If you have trouble releasing the lock, make sure that
Note:
the cover is pushed all the way back.
3.
Slide the cover forward to remove it completely. The
cover slides along grooves that run on the sides of the
unit.
4.
Touch the bare metal frame of your system unit to
dissipate the static electricity from your body. Do not
touch any of the components inside the frame before
you touch the frame. Do not touch any component with
a voltage warning label.
5.
Disconnect the system unit power cord.
Opening the system unit 6-5