Removing the side cover
Complete the following steps to remove the side cover of the computer:
1. Read the "Installation guidelines" on page 10.
2. Turn off the computer and all attached devices (see "Turning off the computer"
3. Press the cover-release button on the side of the computer, and push the side
To replace the side cover, see "Replacing the side cover" on page 31.
Attention:
the computer. Operating the computer with the cover removed might damage
computer components.
16
IBM IntelliStation M Pro Types 6225 and 6228: Installation Guide
on page 33); then, disconnect all power cords and external cables.
cover toward the rear of the computer. Lift the side cover off the computer and
set it aside.
For proper cooling and airflow, replace the side cover before turning on