Bios Setup Utility; Starting And Exiting The Bios Setup Utility - Fujitsu Primergy TX120 User Manual

8.2 BIOS Setup Utility

This section explains settings for the BIOS Setup Utility and items regarding each
setting.

8.2.1 Starting and Exiting the BIOS Setup Utility

The following explains how to start and exit the BIOS Setup Utility.
How to Start the BIOS Setup Utility
1
Turn the server on.
2
During POST, press the [F2] key while the message "<F2>BIOS Setup / <F12>
BOOT Menu" is displayed on the screen.
The [Main menu] window appears when the POST completes.
Main
System Time:
System Date:
Diskette A:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
Help
F1
Exit
Esc
When the [Main menu] window does not appear
When the [Main menu] window does not appear because the [F2] is pressed at wrong timing,
press the [Ctrl] + [Alt] + [Delete] keys at the same time to restart the system, then start the
BIOS Setup Utility.
Advanced Security Server
[HH:MM:SS]
[MM:DD:YYYY]
[1.4M]
[******]
640KB
***M
-/+ Change Values
Select Item
Select Menu Enter Select
PRIMERGY TX120 User's Guide
Exit
Item Specific Help
F9 Setup Defaults
Save and Exit
Sub-Menu F10
8
191