Fujitsu Primergy TX120 User Manual page 35

2
Have the label side of the CD-ROM forward, position the hole of the disc to the
projection on the center of the tray, and then set the CD-ROM firmly until it
clicks.
If the disc is not set properly, it may not be played or ejected.
CD-ROM tray
3
Press the CD-ROM eject button.
The tray is inserted into the server and CD-ROM is set.
When CD-ROM is set, the CD-ROM access LED is lit. To do next operation, confirm that the
LED is off.
Ejecting the CD-ROM
To eject the CD-ROM, confirm that the CD-ROM access LED is off and then press the CD-ROM eject
button.
PRIMERGY TX120 User's Guide
1
35