Fujitsu Primergy TX120 User Manual page 146

Chapter 5 Operations after OS Installation
3
Click [Expert Mode] on the [Broadcom Teaming Wizard].
4
Specify [Team Name], [VLAN ID], and [VLAN Name] in the [Create New VLAN]
window.
The [Team Name] is not displayed when the [Add VLAN] window appears.
The [VLAN ID] should be identical with the switch setting.
The [VLAN Name] does not need to be identical with the switch setting.
5
When the setting for the team is completed, click [OK].
6
Click [Apply] to apply the settings.
After the network is temporarily disconnected, a window is displayed. Click [Yes (Y)].
146
You cannot use a "VLAN ID" or "VLAN Name" that has already been used. Enter another set
value.