Fujitsu Primergy TX120 User Manual page 115

4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver. Windows already has a driver that you can
use for "LSI MEGARAID Products for Windows 2003(x86)"(or
"LSI Logic PCI SCSI/FC MPI Miniport Driver(Server 2003
32bit)) Unless the device on the floppy disk, you should
use the driver in Windows.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
6
Follow the instructions from the setup program to continue the installation
procedure.
If a message indicating that the driver has not passed Windows Logo testing to verify its
compatibility with Windows appears, select [Yes] to continue the installation procedure.
7
Install the ChipSet driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD-ROM.
[CD-ROM drive] :\DRIVERS\ChipSet\Intel\Intel3000\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.117).
9
Install the Display driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD-ROM.
[CD-ROM drive] :\DRIVERS\VIDEO\MATROX\w2k_w2k3\ServerEngines G200e
SETUP.exe
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the installation is completed, eject the ServerStart CD-ROM from the CD-
ROM drive and click [Finish] to restart the system.
10
Apply Windows Server 2003 Service Pack.
For details, refer to the description in the window.
PRIMERGY TX120 User's Guide
4
115