Fujitsu Primergy TX120 User Manual page 203

Item
System Event Log
SDRR Browser
LAN Setting
LAN Settings Submenu
Use this submenu to configure LAN settings when performing the remote operation using
RemoteControlService.
Item
DHCP
Local IP address
Subnet mask
Gateway address
table: Items on the IPMI Submenu
Setting
Displays the system event logs. Press the [Enter] key to display the system event
log window. Display previous and subsequent entries using [+] [-] keys.
Displays sensor information. The SDRR Browser is displayed by pressing [Enter].
Configures the LAN settings of the Remote Management Controller port. This
setting is required when performing the remote operation using
RemoteControlService. Press the [Enter] key to display the "
Submenu" ( pg.203) window.
table: Items on the LAN Settings Submenu
Setting
• Disabled (Initial value) Sets whether or not to obtain LAN IP address of the
• Enabled Remote Management Controller port from the DHCP
server.
Enter an IP address for the Remote Management
[192.168.120.101]
(Initial value) Controller port.
Sets the subnet mask of the Remote Management
[255.255.255.000]
(Initial value) Controller port that is specified for [Local IP
address].
Sets the gateway address of the Remote Management Controller port that is
specified for [Local IP address].
PRIMERGY TX120 User's Guide
Description
LAN Settings
Description
8
203