Pci Configuration Submenu - Fujitsu Primergy TX120 User Manual

Item
LAN Remote Boot
Management LAN
Hard Disk Controller
Hard Disk Option ROM
Scan

8.2.7 PCI Configuration Submenu

Use this submenu to set the PCI device.
Main Advanced
PCI SLOTS Configuration:
PCI IRQ Configuration:
F1 Help
Esc Exit
Item
PCI SLOTS Configuration
PCI 32 Slot 1 Configuration
Option ROM SCAN
PCI-E (x8) Slot 2 Configuration
Option ROM SCAN
PCI-E (x1) Slot 3 Configuration
Option ROM SCAN
PCI IRQ Configuration
PCI IRQ Line 1–8
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled (Initial value)
• PXE
Enabled (Unchangeable)
Enabled (Unchangeable)
Enabled (Unchangeable)
Security Server
PCI Configuration
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the PCI Configuration Submenu
Setting
Configures the PCI slots. Press the [Enter] key to display the [PCI SLOTS
Configuration] submenu window.
• Enabled
• Disabled (Initial value)
• Enabled
• Disabled (Initial value)
• Enabled
• Disabled (Initial value)
Sets PCI IRQs for the PCI slots. Press the [Enter] key to display the [PCI
IRQ Configuration] submenu window.
Auto (Unchangeable)
PRIMERGY TX120 User's Guide
Description
Sets whether or not to perform a network boot.
This function allows booting the server via the
network.
You can set this item only when [LAN Controller]
is set to [Enabled].
Sets whether to enable or disable the port for the
Remote Management Controller.
Sets whether to enable or disable the onboard SAS
controller.
Sets whether or not to initialize the extended ROM.
Exit
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Sub-Menu
Description
Sets whether or not to initialize the extended
ROM in each PCI slot.
Sets the PCI IRQ.
8
199