Group Scan Operation; Adding/Deleting To/From Scan - Ericsson TRUNKED MDX Operator's Manual

Receiving An Individual Call
When you receive an Individual Call (call directed only to your radio), the
display changes to one of the following displays:
1. "*INDV*"
2. "IDxxxxx", where XXXXX is the numeric ID of the calling radio
3. "ALPHA", where ALPHA is the alpha name of the calling radio
Receiving an Individual Call will also cause the BSY indicator to turn
on. After the transmission, the BSY indicator will go out. The display
will continue to show the above until the pre-defined time-out for
calling back expires. During this callback period, press the PTT
button to return the call. If the call is not returned before the time has
expired, the display will return to the Group display with a "C*" at
the left side or a "*C" at the right side of the display or P1, P2
indicators flashing. This indicates a call has been received. Pressing
CLR will cause this indicator to go out. The radio will retain the ID
in the Special Call list until the radio is powered off or another call is
received.

GROUP SCAN OPERATION

You may program your radio to scan a number of Groups for activity.

Adding/Deleting To/From Scan

To add a Group to Scan,
1. Press the MENU button until SCAN A/D is displayed for menu
operation.
2. Press the GROUP/SEL (-) button until the GROUP name is dis-
played.
3. Press the GROUP/SEL (+) button until the desired level is displayed
(NONE or S).
4. Press the CLR button when complete to return to normal operation
or menu operation.
If your radio has one of the auxiliary keys pre-programmed to edit the
SCAN list, the list may be changed by using the GROUP/SEL buttons to
display the GROUP name, and then pressing the auxiliary key until the desired
level is displayed.
26