Checking The Condition Of The Bulb Sockets; Checking The Leds - Yamaha XT660R S Service Manual

CHECKING THE BULBS AND BULB SOCKETS
http://manuals.magnamaniac.com
CHECKING THE CONDITION OF THE BULB
SOCKETS
The following procedure applies to all of the
bulb sockets.
1. Check:
• bulb socket (for continuity)
(with the pocket tester)
No continuity → Replace.
Pocket tester
90890-03112
NOTE:
_
Check each bulb socket for continuity in the
same manner as described in the bulb section;
however, note the following.
M MMM M MMM M M MMM
a. Install a good bulb into the bulb socket.
b. Connect the pocket tester probes to the
respective leads of the bulb socket.
c. Check the bulb socket for continuity. If any
of the readings indicate no continuity,
replace the bulb socket.
L LLL L LLL L L LLL

CHECKING THE LEDs

The following procedures applies to all of the
LEDs.
1. Check:
• LED (for proper operation)
Improper operation → Replace.
M MMM M MMM M M MMM
a. Disconnect the meter assembly coupler
(meter assembly end).
8 - 9
ELEC
M M MMM M M MMM M
L L LLL L L LLL L
M M MMM M M MMM M
– +
M MMM M MMM
L LLL L LLL
M MMM M MMM