Assembling The Front Fork Legs - Yamaha XT660R S Service Manual

1
2
1
2
http://manuals.magnamaniac.com
3. Check:
• damper rod 1
Damage/wear → Replace.
Obstruction → Blow out all of the oil pas-
sages with compressed air.
• oil flow stopper 2
Damage → Replace.
CAUTION:
_
• The front fork leg has a built-in damper
adjusting rod and a very sophisticated
internal construction, which are particu-
larly sensitive to foreign material.
• When disassembling and assembling the
front fork leg, do not allow any foreign
material to enter the front fork.
EAS00659

ASSEMBLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
_
• Make sure the oil levels in both front fork
legs are equal.
• Uneven oil levels can result in poor han-
dling and a loss of stability.
NOTE:
_
• When assembling the front fork leg, be sure
to replace the following parts:
- inner tube bushing
- outer tube bushing
- oil seal
- dust seal
• Before assembling the front fork leg, make
sure all of the components are clean.
1. Install:
• damper rod 1
• rebound spring 2
3
CAUTION:
_
Allow the damper rod assembly to slide
slowly down the inner tube 3 until it pro-
trudes from the bottom of the inner tube.
Be careful not to damage the inner tube.
4 - 58
FRONT FORK
WARNING
CHAS