Checking The Cylinder Head - Yamaha XT660R S Service Manual

1
2
http://manuals.magnamaniac.com
CYLINDER HEAD
EAS00229

CHECKING THE CYLINDER HEAD

1. Eliminate:
• combustion chamber carbon deposits
(with a rounded scraper)
NOTE:
_
Do not use a sharp instrument to avoid damag-
ing or scratching:
• spark plug bore threads
• valve seats
2. Check:
• cylinder head
Damage/scratches → Replace.
• cylinder head water jacket
Mineral deposits/rust → Eliminate.
3. Measure:
• cylinder head warpage
Out of specification → Resurface the cylin-
der head.
Maximum cylinder head warpage
0.03 mm (0.0012 in)
M MMM M MMM M M MMM
a. Place a straightedge 1 and a thickness
gauge 2 across the cylinder head.
b. Measure the warpage.
c. If the limit is exceeded, resurface the cylin-
der head as follows.
d. Place 400 ~ 600 grit wet sandpaper on the
surface plate and resurface the cylinder
head using a figure-eight sanding pattern.
NOTE:
_
To ensure an even surface, rotate the cylinder
head several times.
L LLL L LLL L L LLL
5 - 11
ENG
M M MMM M M MMM M
L L LLL L L LLL L
M MMM M MMM
L LLL L LLL