Yamaha XT660R S Service Manual page 63

È When fastening the front brake light switch lead,
leave some slack in the lead at the area shown.
É Fasten the right handlebar switch lead, front
brake light switch lead, and throttle cables with a
plastic band. Face the end of the plastic band
forward.
Ê Fasten the clutch cable with a cable holder.
Ë Fasten the left handlebar switch lead and clutch
switch lead with a plastic band. Face the end of
the plastic band forward.
http://manuals.magnamaniac.com
2 - 36
CABLE ROUTING
Ì Route the throttle cables, left handlebar switch
lead, right handlebar switch lead, front brake
light switch lead, and clutch switch lead in front
of the steering column, then the clutch cable,
then the headlight lead and meter assembly
lead, and finally the main switch lead and immo-
bilizer unit lead.
SPEC