Yamaha XT660R S Service Manual page 20

Tool No.
T-handle
Damper rod holder
T-handle
90890-01326
Holder
These tools are used to hold the damper
90890-01460
rod holder when removing or installing
the damper rod.
Radiator cap tester adaptor
90890-01352
This tool is used to check the cooling sys-
tem.
Flywheel puller
90890-01362
This tool is used to remove the A.C. mag-
neto rotor.
Fork seal driver weight
Fork seal driver attachment (ø43)
Weight
90890-01367
Attachment
These tools are used to install the oil
90890-01374
seal, dust seal, and the outer tube bush-
ing of the front fork legs.
Steering nut wrench
90890-01403
This tool is used to loosen or tighten the
steering ring nuts.
Radiator tester adapter
90890-01496
This tool is used to check the cooling sys-
tem.
Radiator cap tester adapter
90890-01497
This tool is used to check the cooling sys-
tem.
Sheave holder
90890-01701
This tool is used to hold the A.C. magneto
rotor when loosen or tighten the A.C.
magneto rotor nut.
Tool name/Function
http://manuals.magnamaniac.com
1 - 8
SPECIAL TOOLS
GEN
INFO
Illustration
M8 × 60 mm M8 × 80 mm M8 × 150 mm
M8
M8
M8