Checking The Primary Driven Gear; Installing The Clutch - Yamaha XT660R S Service Manual

3
2
1
http://manuals.magnamaniac.com
5 - 47
CLUTCH
2. Check:
• pull rod bearing
Damage/wear → Replace.
EAS00292

CHECKING THE PRIMARY DRIVEN GEAR

1. Check:
• primary driven gear
Damage/wear → Replace the primary drive
gear and clutch housing as a set.
Excessive noise
Replace the primary drive gear and clutch
housing as a set.
EAS00299

INSTALLING THE CLUTCH

1. Install:
• clutch boss
• lock washer
New
• clutch boss nut 1
NOTE:
Lubricate the crankshaft end threads with
engine oil.
2. Tighten:
• clutch boss nut
NOTE:
_
While holding the clutch boss 2 with the uni-
versal clutch holder 3, tighten the clutch boss
nut.
Universal clutch holder
90890-04086
3. Bend the lock washer tab along a flat side of
the nut.
ENG
during operation
90 Nm (9.0 m · kg, 65 ft · lb)
→