Termination Card; Server Monitor Module Connector (J7H1) - Silicon Graphics 1450 Maintenance Manual

Termination Card

Server Monitor Module Connector (J7H1)

007-4276-001
Table A-26 (continued)
Pin Signal
B9 PWRGOOD
B10 VSS6
B11 VCCP7
B12 VSS7
B13 VCCP8
B14 VSS8
B15 VCCP9
B16 VSS9
B17 VCCP10
B18 VSS10
B19 VCCP11
B20 VSS11
*Type (in/out) is from the perspective of the baseboard.
You must install a termination card in any vacant processor card slot to ensure reliable
system operation.
The termination card contains AGTL+ termination circuitry, clock signal termination,
and test access port (TAP) bypassing for the vacant connector. The system does not boot
unless all slots are occupied with a processor or termination card.
The baseboard supports the server monitor module (SMM) feature connector. Table A-27
shows the pinout of the 26-pin baseboard connector.
Processor VRM Connectors (J2A2, J2B1, J2C1)
Type*
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
Baseboard Connectors
125