JVC AA-V20EG/EK Instructions Manual page 5

1
Make sure you unplug the camcorder's DC
cord from the AC Power Adapter/Charger. Plug
the AC Adapter/Charger's power cord into an
AC outlet. The POWER indicator lights.
2
Remove the battery pack's protective cap.
Attach the battery pack with its long groove
pointing toward the indicator side of the
battery pack mount on the AC Power Adapter/
Charger. The CHARGE Indicator begins
blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking
but stays lit, charging is finished.
4
Slide the battery in the opposite direction of
the arrow and lift off. Remember to unplug the
AC Adapter/Charger's power cord from the AC
outlet.
NOTE:
Perform charging where the temperature is
between 10°C and 35°C. 20°C to 25°C is the
ideal temperature range for charging. If the
environment is too cold, charging may be
incomplete.
Battery pack
BN-V207U
BN-V214U
* When charged at temperatures between 20°C and
25°C.
•When charging Battery Packs after a long storage
period, charging time will be longer than the time
indicated above.
Charging time
approx. 1 hr. 30 min.*
approx. 3 hrs.*
EN-5