Radiator Grill, Removing And Installing - BMW 1999-2005 M3 Service Manual

Exterior Trim, Bumpers
2 of 3
http://ebahn.bentleypublishers.com/BMW/3/E46/Repair%20Manuals/5...
Installation is reverse of removal.
Replace any clips or clip covering
boots damaged during removal.
Radiator grill, removing and
installing
Open hood.
-
Gently pry out tab on left or right side
of grill trim ring (A), as well as tabs on
bottom.
Feed grill out through opening. Be
-
careful of hood lever on driver's
side grill.
Once grill is removed, pry
-
remaining tabs (B) to separate
inner grill from chrome trim ring.
- Before installation, assemble
chrome trim ring and grill insert
securely. Replace components if
tabs or catches are broken or
missing.
To install align grill and trim ring in
appropriate location in hood. Press on
trim ring until grill snaps into place.
2/25/2009 10:44 PM