6. To remove the door strike, squeeze the rear of the
strike with a pair of pliers and push the strike out the
front of the inner door liner.
7. To remove the door strike bracket, remove the three
screws holding the bracket to the inner liner and lift
the bracket out.
8. The inner door glass is held to the inner liner by (2)
metal clamps, (1) at each end.
To remove the inner door glass, remove the (2)
tamperproof screws one at each end of the glass
and lift the glass out.
9. The rubber seal around the glass will lift off. When
reinstalling the glass, be sure that the rubber seal
does not roll.
Removing the catch plate
1. Open the loading door and remove the (2) Phillips
screws holding the door latch assembly to the front
panel.
Removing the catch
1. Open the loading door and remove the catch plate.
69
:
: