Options; Dryer Features; Control Lock; Start/Pause - Electrolux 6000 Service Manual

Occasionally a load may seem too damp or over-dried
at the end of the cycle. To increase drying time for similar
loads in the future, select More Dry. For loads requiring
less drying time, select Less Dry.
Select Damp Dry for items you wish to partially dry
before hanging or ironing.
Note: To prevent over-drying, not every dryness
level is available with every cycle.

Options

To select an option, press Options until the indicator for
the desired option flashes, then press Select. If an option
is not available for a cycle, the indicator will not light.
Follow the same steps to delete an option.
A Signal will sound at the end of the cycle and
periodically during Extended Tumble. The signal has an
adjustable volume level or can be turned off.
Select Shrink Guard to lower the initial drying
temperature to protect fabrics from overdrying.
Select Extended Tumble if the dried load might not be
removed promptly at the end of the cycle. The dry load
will continue tumbling without heat for 30 minutes to help
reduce wrinkling. When the Signal is selected, a beep
will be heard periodically. The load may be removed any
time during Extended Tumble.

Dryer Features

Control Lock

To avoid having someone accidentally start or stop the
dryer, press Options and Select at the same time and
hold for 10 seconds. "LOC" will be displayed. To remove
the control lock, press Options and Select again.

Start/Pause

Press Start/Pause to start, pause or restart a cycle.
"PAU" will be displayed alternately with the estimated
time remaining when the cycle is paused.

Cancel

Press Cancel to stop the cycle.

Status Lights

The following indicators may be lighted during the cycle:
Drying
Cool Down
Extended Tumble
15