Starting The Programme; Changing Programme; Putting In Extra Items Or Taking Items Out Before End Of Programme; Drying Cycle Complete / Removing Laundry - Electrolux LAVATHERM 56740 User Manual

Starting the programme

Press the START PAUSE START PAUZE button.
Led above stops flashing, becomes steady. The
programme is started. Display shows elapsing
cycle time or delay time if activated.

Changing programme

To change a programme which has been selected by mistake once the programme
has started, first turn the programme selector to OFF UIT and then reset the pro-
gramme.
The programme can no longer be changed directly once the programme has started.
If nevertheless there is an attempt to change the programme on the programme
knob, the programme progress display and the maintenance indicators flash. If an
option button (excluding the BUZZER ZOEMER button) is pressed, Err appears in
the multidisplay. The drying programme is not however affected by this (laundry
protection).

Putting in extra items or taking items out before end of programme

1. Open loading door.
WARNING!
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE START PAUZE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0". If the BUZZER
ZOEMER button has been pressed, an acoustic signal sounds intermittently for
about one minute.
Daily use 17