NOTE
As indicated in
connect the wires that are labeled "Reserved", you might get unexpected results with some
terminals.
FIGURE 48
Management port pin assignments
The management port is an RJ-45 UTP connector.
assignments.
TABLE 19
Pin number
1
2
3
4
5
6
7
8
Brocade NetIron CES and Brocade NetIron CER Hardware Guide
53-0000080-03
Figure 47
and
Figure
48, some of the wires should not be connected. If you do
Console port pin assignments showing cable connection options to a terminal or PC
Management port pin assignments
MDI-X ports
TD+
TD-
RD+
Not used (10BaseT)
CMT (100BaseTX)
Not used (10BaseT)
CMT (100BaseTX)
RD-
Not used (10BaseT)
CMT (100BaseTX)
Not used (10BaseT)
CMT (100BaseTX)
Port specifications
Table 19
describes the connector's pin
C
95