Brocade Communications Systems NetIron CES Series Hardware Manual page 48

3
Redundant power supply installation
FIGURE 29
4. Insert the wires into the DC wiring assembly
5. Use the wire tightening screws to secure the wires.
6. Insert the DC connector with wires to the power supply and tighten the two assembly screws.
FIGURE 30
1
36
The DC power supply
The DC wiring assembly
Wire tightening screws 2
(Figure 30).
Assembly screws
Brocade NetIron CES and Brocade NetIron CER Hardware Guide
53-0000080-03