Ac Power Supply; Power Supplies For The Devices - Brocade Communications Systems NetIron CES Series Hardware Manual

This command displays status information for the power supplies and the fans. The power supplies
are numbered from left to right. These numbers assume you are facing the front of the device, not
the rear.
If the display indicates "Installed (Failed)" for any of the slots, the power supply installed in that
particular slot has failed.

AC power supply

FIGURE 37

Power supplies for the devices

The device ships with one alternating-current (AC) power supply or direct-current (DC) power supply.
All models have two power supply slots, enabling you to install a second power supply for
redundancy. If desired, you can install a second supply for redundancy.
If you need to install a redundant power supply, it may be easier to install it before mounting the
device, although the power supplies are "hot swappable" and can be installed or removed after the
device is mounted and powered on. Brocade recommends that you disconnect the power supply
from AC power before installing or removing the supply.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Brocade NetIron CES and Brocade NetIron CER Hardware Guide
53-0000080-03
AC power supply
Power supply replacement
5
59