2
Installing a redundant power supply
FIGURE 22
1 Input port
2 AC power supply no.1
3 Redundant power supply
NOTE
For International use, you may need to change the AC line cord. You must use a line cord set that
has been approved for the receptacle type in your country.
Port pin-out diagram for the RPS2-EIF power supply
Figure 23
24
DRAFT: BROCADE CONFIDENTIAL
Connecting multiple devices to a redundant power supply.
1
3
2
and
Table 9
describe the pin-outs for the RPS2-EIF power supply.
4
FWS devices
5
Output port
6
AC power supply no.2
4
5
6
Brocade FastIron WS Hardware Installation Guide
53-1002188-01